Partial Melting of Metapelitic Rocks Beneath the Bushveld Complex, South Africa   总被引：6，自引：5，他引：6  

JOHNSON  TIM E.; GIBSON  ROGER L.; BROWN  MICHAEL; BUICK  IAN S.; CARTWRIGHT  IAN 《Journal of Petrology》2003,44(5):789-813

Metapelitic rocks in the aureole beneath the Bushveld Complexpreserve evidence for both high- and low-a_H2O anatexis. Theaureole is characterized by an inverted thermal structure inwhich suprasolidus rocks potentially interacted with an H₂O-richvolatile phase derived from underlying, dehydrating rocks. Atlower grade (T < 700°C) the rocks contain fibrolite matsand seams that record local redistribution of volatiles. Incongruentreactions consuming biotite produced small quantities (<1mol %) of liquid and peritectic cordierite that remained trappedwithin the mesosome. Larger volumes of melt (3–4%), preservedas coarse-grained discordant leucosomes, were produced by congruentmelting following a structurally focused influx of H₂O. Subhorizontalvolatile-phase flow was concentrated within thin (  相似文献   

VLF RESISTIVITY MAPPING AND VERTICALIZATION OF THE ELECTRIC FIELD1     

ALAIN TABBAGH  YVES BENDERITTER  PIERRE ANDRIEUX  JEAN PAUL DECRIAUD  ROGER GUERIN 《Geophysical Prospecting》1991,39(8):1083-1097

For over 20 years, powerful VLF transmitters have been used as electromagnetic sources for subsurface investigations in mining exploration. Measurements initially concerned the vertical component of the magnetic field or the inclination of the field and were later extended to measurement of the horizontal electric field in the direction of the transmitter, to determine the resistivity of the terrain. Measurement of the electric field is usually performed with electric lines, grounded or not, with lengths of at least 5 m. This paper presents the concept of a VLF resistivity meter with a very short electric sensor (1 m) and the results obtained with it. This technique improves the measurement of the electric field, which is in principle a point value. It also permits a higher spatial sampling rate and, by closely linking the electric sensor with the magnetic sensor on a lightweight mount, makes it possible for the instrument to be used by a single operator. In addition, transformation of the electric field data, analogous to reduction to the pole in magnetism, is proposed to correct the horizontal deformation of the anomalies created by polarization of the primary field. Comparison with direct current electrical measurements shows highly satisfactory correlations. This transformation, validated for VLF, can be extended to any electrical or electromagnetic method using a uniform primary field, i.e. gradient array in direct current or low-frequency magnetotellurics. We call this verticalization of the electric field. Resistivity measurements and mapping using the VLF frequency range can be applied not only to mining but also to a wide range of shallow geophysical studies (hydrology, civil engineering, etc.) and are not limited to problems concerning the location of conductive targets  相似文献   

Sedimentology and tectonic implications of Cretaceous fan-delta conglomerates, Queen Charlotte Islands, Canada   总被引：1，自引：0，他引：1  

ROGER HIGGS 《Sedimentology》1990,37(1):83-103

The Honna Formation, of Coniacian age, consists of several hundred metres of polymictic clast-supported conglomerate associated with sandstone and mudstone. Five conglomerate facies are recognized: ungraded beds; inverse graded beds; normal graded beds; inverse-to-normal graded beds; and parallel-stratified beds. These facies are interpreted as the deposits of subaqueous cohesionless debris flows and/or high-density turbidity currents. The depositional environment was a deep-water, gravelly fan that draped a fault-controlled, basin-margin slope. The fan is inferred to have passed upslope directly into an alluvial fan (unpreserved); hence, the name fan delta can be applied to the overall depositional system. This type of fan delta, of which the Brae oilfield in the North Sea is an example, is defined here as a deep-water fan delta. The lack of a shelf is in marked contrast to other types of fan delta. Three facies associations are recognized in the Honna Formation: subaqueous proximal-fan conglomerates, distal-fan turbiditic sandstones, and pro-fan/interfan mudstones with thin sandy turbidites. The proximal fan is envisaged as an unchannelled gravel belt with a downslope length of at least 20 km; such a long subaqueous gravel belt lacks a known modern analogue. The distal fan was an unchannelled sandy extension of the proximal gravel belt. It is postulated that the Honna Formation accumulated in a foreland basin which migrated westwards from the Coast Mountains where the Wrangellia-Alexander terrane was colliding with North America. In this model, the Honna fan delta was sourced by a (west-verging) thrust sheet whose sole-thrust was the Sandspit Fault immediately to the east. Deep-water fan deltas appear to develop preferentially when eustatic sea-level is relatively high, so that the‘feeder’ alluvial fan is small, and gravelly throughout. In petroleum exploration and field development, care should be taken to distinguish deep-water fan deltas from base-of-slope (canyon-fed) submarine fans, because the two systems differ significantly in terms of coarse-sediment distribution.  相似文献   

Facies relationships in Pleistocene outwash gravels, southern Ontario: a model for bar growth in braided rivers   总被引：1，自引：1，他引：1  

GEORGE EYNON  ROGER G. WALKER 《Sedimentology》1974,21(1):43-70

Facies relationships in Pleistocene braided outwash deposits in southern Ontario demonstrate the presence of a large braid bar with adjacent side channel. The core of the bar is up to 6 m high, and consists of crudely horizontally stratified gravels. Downstream from the core is the bar front facies, consisting of large gravelly foresets up to 4 m high, rounded off in many places by reactivation surfaces. Upstream from the core is the bar stoss side facies consisting of several sets (individually up to 35 cm thick) of tabular cross-bedding, arranged in coarsening-upward sequences. The stoss side—core—bar front relationships are continuously exposed in one 400 m long quarry face which is cut almost parallel to the palaeoflow direction. A transverse quarry face shows the side channel facies, which consists of trough cross-bedded sands. Gravel layers can be seen to finger from the main gravelly bar into the sandy side channel, but they do not reach the base of the channel. This surprising relationship indicates that gravel moved only in the topographically higher parts of the system. After deposition in the side channel, and growth upstream and downstream from the bar core, the entire system aggraded. Crudely horizontally stratified, and imbricated gravel sheets were laid down as a bar top facies. Grain size analyses indicate strongly bimodal distributions, implying that much of the sand in the spaces between pebbles and boulders filtered in after the gravel had been deposited. This interpretation is strengthened by velocity calculations—mean velocities in excess of 300 cm/s would be needed to roll the gravel as bed load, but at such a velocity, a large amount of sand would be transported entirely in suspension. In a final section of the paper, our results are combined with other work on braided systems in an attempt to formulate a more general facies model.  相似文献   

An internally consistent thermodynamic dataset with uncertainties and correlations: 1. Methods and a worked example   总被引：2，自引：0，他引：2  

ROGER POWELL  T. J. B. HOLLAND 《Journal of Metamorphic Geology》1985,3(4):327-342

Abstract This, the first two papers, sets out the philosophy and methods of determining an internally consistent thermodynamic dataset for minerals using the least squares method. The applicability of the least squares method is discussed, and it is applied to a small set of experimental equilibria in the system Na₂O–Al₂O₃–SiO₂–H₂O. The importance is stressed of defining not only the enthalpies of formation of minerals, but also the uncertainties and the correlations among them. The system which has been used as an illustration for this paper serves as a visual guide to the method, as it is small enough to represent graphically in two dimensions. In the paper which follows, we extend the method to a system of 60 equations (experimentally determined equilibria) involving 34 unknowns (enthalpies of formation of mineral end-members).  相似文献   

An internally consistent thermodynamic dataset with uncertainties and correlations: 2. Data and results   总被引：4，自引：0，他引：4  

T. J. B. HOLLAND  ROGER POWELL 《Journal of Metamorphic Geology》1985,3(4):343-370

Abstract This, the second of two papers, represents the application of a least squares approach, discussed in the previous paper, to the generation of an internally consistent thermodynamic dataset involving 60 reactions among 43 phases, in the system K₂O–Na₂O–CaO–MgO–Al₂O₃–SiO₂–H₂O–CO₂. We make the assumption that all the thermodynamic data, with the exception of enthalpies of formation of the phases, are well known, and solve for an internally consistent set of enthalpies which reproduces the 60, experimentally determined, phase equilibrium reactions. An important difference between our dataset and that of previous alternatives in the literature is that we are able to determine the uncertainties on, and correlations between, the enthalpies of formation for all phases in the set, and hence are able to apply simple error propagation techniques to determine the uncertainties in any phase equilibrium calculations performed using this dataset. Selection of reactions, for geothermometry and geobarometry, may be more readily made by choosing equilibria with small uncertainties in their thermodynamics. Our data are in reasonably close agreement with the high temperature molten oxide calorimetry results on silicate minerals where available, a fact which lends a degree of confidence to the results.  相似文献   

The Cambro-Ordovician Cap Enragé Formation, Queébec, Canada: conglomeratic deposits of a braided submarine channel with terraces     

FRANCES J. HEIN  ROGER G. WALKER 《Sedimentology》1982,29(3):309-352

The Cambro-Ordovician Cap Enragé Formation is interpreted as a deep submarine channel complex of conglomerates, pebbly sandstones and massive sandstones. The formation is up to 270 m thick, and crops out in a coastal belt 50 km long. In general terms, it has previously been interpreted as a deep sea channel deposit, with the channel about 300 m deep, at least 10 km wide and trending south-westward, parallel to the coastal outcrops. Eight facies have been defined in this study and they have been grouped into three major facies associations. In the Coarse Channelled Association, conglomerates with carbonate boulders up to about 4 m are associated with graded-stratified finer grained conglomerates. Facies of this association make up about 25% of all the beds in the formation. The association is also characterized by abundant major channels 1–10 m deep and up to 250 m wide. Excellent outcrop allows the reconstruction of topographic highs (bars) within the channels and the association is interpreted as a braided channel and bar system. The second association, Multiple-Scoured Coarse Sandstones, contains some graded-stratified fine conglomerates, along with massive to structureless coarse and pebbly sandstones, and rare cross-bedded pebbly sandstones. Deep channels are absent, but multiple channelling on the scale of 0.5–1 m is characteristic. In the absence of the very coarse conglomerates and deeper channelling, this association is interpreted as being deposited on topographically higher terrace areas adjacent to the main braid plain. The third facies association, Unchannelled Sandstones, is characterized by massive sandstones with abundant fluid-escape structures, classical turbidites and thin shales. In the absence of any scouring deeper than a few tens of centimetres, this association is interpreted as being deposited on an even higher and smoother terrace, farther from the braid plain. Palaeoflow directions for conglomerate facies indicate fairly consistent south-westward transport, apparently parallel to the base of the Cambro-Ordovician continental slope. Flow directions in the finer-grained facies are rather variable, suggesting complex bar development and overbank spills. Thinning-and fining-upward sequences are present on two scales. The smaller, 1–10 m sequence, is related to channel filling and abandonment. Thicker sequences (10–100 m), with facies of the Multiple Scoured, and Unchannelled Sandstone Associations, may indicate switching of a main channel away from the area and its subsequent burial by marginal terrace and higher terrace deposits.  相似文献   

Mafic Mineralogy of Ferroaugite Syenite from the Coldwell Alkaline Complex, Ontario, Canada     

MITCHELL  ROGER H.; PLATT  R. GARTH 《Journal of Petrology》1978,19(4):627-651

A 1500 m thick sheet-like body of ferroaugite syenite is divisiblemineralogically into an upper and lower series of syenites.The lower syenites are characterized by well developed igneouslayering defined by mafic cumulus minerals. The syenites aresaturated to oversaturated and contain as cumulus phases alkalifeldspar, olivine (Fa_83–93), ferroaugite (Di₅₀Hd₄₅Ac₅–Di₅Hd₉₀Ac₅)and ilmeno-magnetite. Amphiboles which crystallized from theintercumulus liquid range in composition from ferrohastingsitichornblende to ferroedenitic hornblende to ferroactinolitic edenite.The upper series are coarse grained cumulates with poorly definedlayering and abundant patch pegmatites. Cumulus phases are alkalifeldspar, olivine (Fa₉₃), and acmitic-hedenbergite (Di₅Hd₅₀Ac₅–Ac₅₀Hd₅₀).Intercumulus liquids are peralkaline and crystallized to aenigmatiteand amphiboles which range in composition from ferrorichteritickatophorite to ferrorichterite, Patch pegmatites are peralkalinerocks composed of ferrorichterite, ferroactinolite, alkali feldspar,aenigmatite, quartz and zircon. Extreme differentiation of ferroaugitesyenite magma generates residua which are ironrich, oversaturatedand peralkaline. Initial and final temperatures of crystallizationare estimated from mineral stability data to be 800–900°C to 500–550 °C respectively. Thermodynamic dataand mineral compositions indicate that during crystallizationthe oxygen fugacity of the magma decreased from approximately10^–15 to 10^–23–10^–24 bars. Ferroaugitesyenite pyroxene compositional trends are similar to those ofundersaturated peralkaline syenites (llimaussaq) and demonstratethat acmite enrichment trends are independent of silica activityand take place under decreasing oxygen fugacities.  相似文献   

Evidence for a Variscan suture zone in the Vendée, France: a petrological study of blueschist facies rocks from Bois de Cené   总被引：1，自引：0，他引：1  

M. GUIRAUD  J.-P. BURG  R. POWELL 《Journal of Metamorphic Geology》1987,5(2):225-237

Abstract In the Bois de Cené area, blueschist facies rocks, characterized by glaucophane and/ or chloritoid, provide evidence for a suture zone in the Variscan. This terrain is considered to be the eastern equivalent of the Ile de Groix high-pressure metamorphic terrain. Petrological study of the two characteristic types of rocks found in the area shows that the primary high-pressure paragenesis was modified during a retrogression which followed substantial decompression, probably at constant or decreasing temperature. The simplest interpretation is that this retrogression followed tectonic emplacement within a nappe pile.  相似文献   

FITTING OBSERVED PROFILES TO A MAGNETIZED DYKE OR FAULT-STEP MODEL*     

D. W. POWELL 《Geophysical Prospecting》1967,15(2):208-220

The symmetry shown, by the function describing the magnetic anomaly due to a dyke or vertical fault step leads to a method by which an observed profile may be adjusted to conform with that symmetry. By making these adjustments a minimum the ideal dyke or fault profile closest to the observations is constructed. In three of four possible situations this is interpreted by simple geometry. Parallelpiped models may be transformed into two dykes for symmetry analysis. Depth limited models are not so amenable, even in special cases.  相似文献